- (86)-0512-66832457
- sales@touchplanet.com
简体中文
English
Capacitive touch control board ETM-P64-R01 series
Small capacitance control solution
ETM-P64-R01 control solution（TX23 RX41）：based on the chip TP5803 independently developed by TE. With the 18V transmitting voltage, it supports all bonding solutions of all kinds of capacitive sensors. Suggested size range: 10.1 "-20.5", 10 Touch points, FPS137, supports writing by minimum 5mm passive pen.
Capacitive touch control board ETM-P64-R01 series：ETM-P64-R01 control solution（TX23 RX41）：ETM-P64-R01 controller(TX23 RX41) is based on the chip TP5803 independently developed by TE. With the 18V transmitting voltage, it supports all bonding solutions of all kinds of capacitive sensors. Suggested size range: 10.1 "-20.5", 10 Touch points, FPS137, supports writing by minimum 5mm passive pen.
ETM-P64-R01series control board demo
Features of capacitance control board etm-p64-r01:
based touch solution designed for small size customization.
Based on the chip tp5803 independently developed by touch Explorer, the emission voltage is as high as 18V.
Fast response, fps137. The thickness of the cover plate can reach 10mm, and there is no dead corner for touch control.
it supports all bonding solutions of all kinds of capacitive sensors.
supports writing by minimum 5mm passive pen.
|
Dimension |
Length*50mm Width*28mm Thickness*1mm |
|
Interface |
USB2.0 : Full Speed (12Mbps) |
|
Power Dissipation |
0.1W (Typical value) |
|
Power Supply |
USB（5V +/-5% DC） |
|
FPS |
137Hz(Typical value) |
|
Delay of First Point |
25ms(Typical value) |
|
Sennor Channel |
TX : 23（Max） RX : 41（Max） |
|
Suggested Size |
10.1 "-21.5" |
|
Working temperature |
-20℃～ 70℃ |
|
Storage temperature |
-20℃～ 80℃ |
|
Touch Point |
10 (Typical value) |
|
Cover thickness |
1~10mm |
|
P-CAP Technology Supported |
Nano-Sliver、 ITO、Metal mesh |
|
Minimum object recognized |
Passive pen 5mm |
|
Precision |
≤2mm |
|
Support |
Size customization, USB communication |