- (86)-0512-66832457
- sales@touchplanet.com
ETA-P172-R01 control soltion(TX64 RX108): Based on a high-voltage chip tp2801 and a receiving chip tp1802 independently developed by Touch Explorer, the transmitting voltage is up to 36V, the signal-to-noise ratio is higher, and the response speed is faster. Fps180 supports full bonding and zero bonding of all capacitive sensors, and the underlying protocol is fully open.
Capacitive control board ETA-P172-R01 Series: ETA-P172-R01 control solution(TX64 RX108):Based on a high-voltage chip tp2801 and a receiving chip tp1802 independently developed by touch explorer, the transmitting voltage is up to 36V, the signal-to-noise ratio is higher, and the response speed is faster. Fps180 supports full bonding and zero bonding of all capacitive sensors, and the underlying protocol is fully open. 40 touch points , recommended size: 20.5-55 inches, excellent linearity, minimum support 6mm passive pen .
ETA-P172-R01Series touch control board
Features of capacitive control board eta-p172-r01:
Based on the touch control solution designed for small and medium-sized customization.
Based on the chip tp2801 independently developed by Touch Explorer, the transmission voltage is as high as 36V.
The continuous response delay is 5.5ms, and the first point reporting delay is 20ms.
All seires capacitive technology and all bonding solution supported.
Excellent linearity, 6mm passive pen supported.
Type |
ETA-P172-R01 |
Interface |
USB2.0, UART (TTL level) serial communication needs to be customized, and dual USB is not supported |
Power Dissipation |
0 .25W(Typical value) |
Power Supply |
USB power supply(5V +/-5% DC) |
FPS |
180HZ(Typical value) |
Delay of First Point |
20ms(Typical value) |
Sensor Channel |
TX : 64(Max) RX : 108(Max) |
Suggested Size |
20"~ 55" |
Working temperature |
-20℃ ~ 70℃ |
Storage temperature |
-20℃ ~ 80℃ |
Touch points |
40points(Max) |
Vendor ID |
0x0547 |
Product ID |
0x3003 |
Cover thickness
|
12mm以内(Typical value) |
Minimum object recognized |
Passive pen 6mm |
Support |
Size customization, USB communication |
P-CAP Technology Supported |
Nano-Sliver、 ITO、Metal mesh |
Precision |
≤2mm |
Dimension |
Length*150mm Width*50mm Thickness*1.6mm |